Technical data

5-108 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01
Standard Mode
You can specify a recording type for each data logger:
• Plotter continuous (single values): The plotter moves over the output
area and, in doing so, outputs the values (like an oscilloscope).
• Plotter static (single values): The curve is drawn continuously from
the left or right edge (like an ECG plotter).
• Flash light (all values): The values for the curve are read as a snap-
shot from the controller and displayed in full (copy of all data at a
point in time)
The number of data points must be specified for the horizontal direc-
tion.
You can also select the display orientation.
5.8 Images
You can use images as:
• Background images in masks
• Content for image lists that represent variable values
• Icons for internal error messages
• Images for buttons
• A frame for buttons
You can import images or embed them as objects.
All images that you create are available in the programming software at
the location where you can work with images.
Double-click an embedded object to open the application program that
you used to create the object. You can now edit the object directly. The
system enters the changes to the object into the programming software
after you close the application.
5.9 Symbols
Symbols are images with two colors that are displayed on touch screen
operating devices.
The advantage of using symbols is that you can customize the fore-
ground and background color. If symbols are used in buttons, the col-
ors of the icon are determined depending on the color settings of the
button (for example, you can program a button to change color when it
is pressed).
It is also easy to reuse symbols as the color is determined by the but-
ton or the background.