Technical data

5-100 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01

Standard Mode

CardDataSetMove

CardFileDelete

Function Starts the transfer of data sets from the Compact Flash card to the

operating device or vice versa. To be able to transfer data sets from

the Compact Flash card to the operating device, the name of the

data set must be entered in the system variable CardFileName. All

of the data sets of the current recipe are transmitted during the

transfer from the operating device to the Compact Flash card. The

first 20 characters of the data set name are used as a file name. The

file has the extension .TXT.

Data type Numeric

Representation

type

Positive decimal number, alphanumeric, selection text, selection im-

age, hexadecimal number, binary number

Configurable val-

ues

0 Initial state

1 Transfer to the Compact Flash card

2 Transfer to the operating device

Function Deletes the file specified in the system variable CardFileName from

the Compact Flash card.