Technical data

R911305038 / 01 | Rexroth VCP-Operating Concept Electric Drives and Controls | Bosch Rexroth AG 5-99
Standard Mode
5.5.17.19 Compact Flash Card
CardFileName
CardApplicationMove
Small operator terminals of the VCP type can only use Compact Flash
cards formatted as FAT16. By default, the Windows XP® operating sys-
tem formats Compact Flash cards in FAT32 format! Make sure to
change the settings to activate the FAT16 format when formatting a
Compact Flash card using Windows XP®!
Function Name of a file which you want to access in write mode or read mode.
Enter the file name including the file extension. The file name cannot
exceed a length of 40 characters including the dot and the file exten-
sion!
Data type Alphanumeric
Representation
type
Selection Text
Configurable val-
ues
You can display the content of the Compact Flash card using this sys-
tem variable. The items for the text list are generated automatically.
Function Starts a firmware update from the Compact Flash card. The name
of the S3 file must be entered in the system variable CardFileName.
Data type Numeric
Representation
type
Positive decimal number, alphanumeric, selection text, selection im-
age, hexadecimal number, binary number
Configurable val-
ues
0 Initial state
1 Start firmware update