Technical data

5-90 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01
Standard Mode
5.5.17.12 Running Time Meters
Counter1 to Counter8
5.5.17.13 Loop-Through Operation
Pg2Sps
Function Running time meter 1 to 8. The counter is incremented when the bit
is set.
Data type Numeric
Representation
type
Positive decimal number, alphanumeric, selection text, selection im-
age, hexadecimal number, binary number
Configurable val-
ues
0 to 4.294.967.295
The function of the Running Time Meter is dependent on other param-
eters.
See chapter “Running Time Meter“ on page 5-117.
Function Enables/disables the loop-through mode.
Data type Numeric
Representation
type
Positive decimal number, alphanumeric, selection text, selection im-
age, hexadecimal number, binary number
Configurable val-
ues
0Inactive
1 Upload active
Provisions must be made to be able to use the loop-through operation
with the PG protocol !