Specifications

BMA180
Preliminary data sheet
Bosch Sensortec
Rev. 1.0 Page 14 / - proprietary information - 06 March 2009
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such
as copying and passing on to third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Specifications within this document are preliminary and subject to change without notice. Document is not intended for publication.
2 Absolute maximum ratings
Stresses above absolute maximum ratings may cause permanent damage to the device.
Exceeding the specified characteristics may affect device reliability or cause mal-function.
Parameter Condition Min Max Units
Supply voltage V
DD
and V
DDIO
-0.3 4.25 V
Voltage at any digital pad Vpad_dig V
SS
-0.3 V
DDIO
+0.3 V
Storage temperature range -50 +150 °C
Junction temperature Tj +150 °C
Soldering temperature refer to IPC/J-STD-020C
EEPROM write cycles Same Byte 1000 Cycles
At 55°C, after 1000
cycles
10 Years
EEPROM retention times
(both conditions are non
cumulative, each represents
max. time)
At 85°C, after 1000
cycles
2 Years
Duration ≤ 200µs 10000 g
Duration ≤ 1.0ms 3000 g
Mechanical shock
Free-fall onto hard
surfaces
1.8 m
HBM 2000 V
ESD
MM tbd V
Table 2: Maximum ratings specified for the BMA180