PIM8..F...
PIM8..F...
Ú Table of contents e[nuoIrs]ctimanul Safety precautions .....................................................................3 Elements that may damage the appliance ....................................4 Protecting the environment.......................................................5 Environmentally-friendly disposal.....................................................5 Energy-saving advice .........................................................................5 Induction cooking ....................
Risk of fire! ■ Hot oil and fat can ignite very quickly. Never leave hot fat or oil unattended. Never use water to put out burning oil or fat. Switch off the hotplate. Extinguish flames carefully using a lid, fire blanket or something similar. ■ The hotplates become very hot. Never place combustible items on the hob. Never place objects on the hob. ■ The appliance gets hot. Do not keep combustible objects or aerosol cans in drawers directly underneath the hob.
Overview The following table presents the most common damage caused: Damage Cause Measure Stains Food spillage Immediately remove spilt food using a glass scraper. Unsuitable cleaning products Only use cleaning products specifically designed for glass-ceramic hobs. Salt, sugar and sand Do not use the hob as a tray or working surface. Scratches Pans with rough bottoms may scratch Check pans.
Characteristics of the pan base Empty pans or those with a thin base The characteristics of the pan base may affect the uniformity of the cooking results. Pans made from materials which help diffuse heat, such as stainless steel sandwich pans, distribute heat uniformly, saving time and energy. Do not heat empty pans, nor use pans with a thin base. The hob is equipped with an internal safety system.
Programming the hob This section will show you how to program the hotplates. The table contains power levels and cooking times for several dishes. 2. Next, select the power level in the programming zone. Turning the hob on and off The hob is turned on and off using the main switch. To turn on: press the % symbol. A beep sounds. The indicator located next to the main switch and the ‹ indicators of the hotplates light up. The hob is ready for use.
Power level Boiling, steaming, sautéing Rice (with a double amount of water) 2-3 Rice pudding 1.-2. Potatoes 4-5 Pasta* 6-7 Soups 3.-4. Vegetables 2.-3. Greens, frozen foods 3.-4. Cooked in a pressure cooker 4.-5. Stewing Meat roll 4-5 Stew 4-5 Goulash 3.-4. Bake / Fry with a little oil** Steaks, chops (plain or breaded) 6-7 Beefsteak (3 cm thick) 7-8 Chicken breast (2 cm thick)*** 5-6 Hamburgers, meatballs (3 cm thick)*** 4.-5.
Powerboost function The Powerboost function can be used to heat large amounts of water more quickly than the power level Š. How to activate Restrictions when using 2. Press the boost G symbol. This function is available on all hotplates, provided that no other hotplate in the same group is operating, (see diagram). Otherwise, the › and Š symbols will flash on the display of the selected hotplate; then the power level Š is automatically set. *URXS 1. Select a hotplate. The › indicator lights up.
Cleaning lock function Cleaning the control panel while the hob is switched on may change the settings. locked for 35 seconds. The control panel surface can now be cleaned without the risk of changing the settings. In order to avoid this, the hob has a cleaning lock function. Press the > symbol. A signal sounds. The control panel is Note: The lock does not affect the main switch. The hob may be turned off when desired.
Indicator Function ™‡ Duration of the time program function warning signal ‚ 10 seconds*. ƒ 30 seconds. „ 1 minute. ™ˆ Power-Management function ‹ = Deactivated.* ‚ = 1,000 W. minimum power. ‚.= 1,500 W. ƒ = 2,000 W. etc. Š or Š. = maximum power of the hob. ™Š Hotplate time selection ‹ Unlimited: the last hotplate programmed remains selected.* ‚ Limited: The hotplate will only remain selected for 10 seconds. ™‹ Return to basic settings ‹ Personal settings.* ‚ Return to factory settings.
Fixing malfunctions Malfunctions are usually due to small details. Before calling the Technical Assistance Service you should bear in mind the following advice and warnings. Indicator Malfunction Solution none The electric power supply has been cut off. Use other electrical appliances to check whether there has been a power cut. The appliance has not been correctly connected following the connection diagram. Check that the appliance has been connected correctly according to the connection diagram.
After-sales service Our after-sales service is there for you if your appliance should need to be repaired. We are committed fo find the best solution also in order to avoid an unnecessary call-out. E number and FD number: Please quote the E number (product number) and the FD number (production number) of your appliance when contacting the after-sales service. The rating plate bearing these numbers can be found on the appliance certificate.
Preheating Tested dishes Hotplate Cooking Power level Time (Min:S) Cover Power level Cover 8. approx. 6:30 No 2 stir after approx. 10:00 Yes Cooking rice pudding Cookware: Pot Milk temperature: 7 °C Heat milk until it begins to bubble. Change the recommended heating level and add rice, sugar and salt to the milk Ingredients: 190 g. of short-grain rice, 23 g. of sugar, 750 ml. of milk (3.5% fat) and a pinch of salt Ø 14.5 cm Ingredients: 250 g. of short-grain rice, 30 g. of sugar, 1 l.
Robert Bosch Hausgeräte GmbH Carl-Wery-Straße 34 81739 München Germany www.bosch-home.
