PIM6..R1.. [en] Instructions for installation and use .........
en 278%00%8-32 27869'8-327
4 6 5
en !" " !" # " ! " " " ! S $#27 ', 31# '1 -,*7 %3 0 ,2##" '$ 2 2#!&,'! * ',12 ** 2'-, -$ 2 &- & 1 ##, ! 00'#" -32 !-00#!2*7 ," ', !!-0" ,!# 5'2& 2 ',12 ** 2'-, ',1203!2'-,1 ',12 ** 2'-, 2#!&,'!' , 1& ** # *' *# $-0 ,7 " + %# ! 31#" 1 0#13*2 -$ ',!-00#!2 ',12 ** 2'-, S ,*7 , 32&-0'1#" 2#!&,'!' , '1 *# 2- !-,,#!2 2 ..*' ,!# %3'"#*',#1 1#2 -32 7 2 *-! * #*#!20'!'27 .0-4'"#0 +312 # - 1#04#" S &'1 '1 !* 11 ..
3,0 5 Ú Table of contents Safety warnings and advice ......................................................2 Safety instructions...............................................................................2 Elements that may damage the appliance ....................................3 Protecting the environment.......................................................4 Environmentally-friendly disposal of waste products ...................4 Energy-saving advice .......................
Cooking food using the bain-marie method Fan care The bain-marie method allows you to cook food in a saucepan submerged in a larger pan containing water. The water cooks the food with a gentle and constant heat, rather than directly from the heat of the hotplate. When cooking food in bain-marie, you must prevent tins, glass containers or other material from resting directly on the base of the pan containing the water, to prevent the glass on the hob and the pan from breaking due to hotplate reheating.
Protecting the environment Unpack the appliance and dispose of its packaging in such a way that no damage is caused to the environment. ■ ■ Environmentally-friendly disposal of waste products This appliance conforms to the Waste Electrical and Electronic Equipment Directive WEEE 2002/96/EC. This directive defines the framework for recycling used appliances within European territory ■ Energy-saving advice ■ Always place the correct lid on the pan.
Familiarise yourself with the appliance These instructions for use are applicable to other hobs. On page 5 an overview of the models is provided, along with information on measurements.
3. To change the power level: select the hotplate and press the + or - symbol until the required power level appears. To switch off the hotplate Select the hotplate and then press the + or - symbol until ‹ symbol appears. The hotplate turns off and the residual heat indicator appears. Note: If no pan has been placed on the induction hotplate, the selected power level flashes. After a certain time, the hotplate switches off. Cooking guidelines table The table below contains some examples.
Power level Broil** Steaks, chops (plain or breaded) 6-7 Beefsteak (3 cm thick) 7-8 Chicken breast (2 cm thick) 5-6 Fish and fish fillet without breading 5-6 Fish and fish fillet with breading 6-7 Prawns and shrimps 7-8 Frozen meals (e.g., stir-fries) 6-7 Pancakes 6-7 Omelette 3.-4. Frying** (150-200g per serving with 1-2 l. of oil) Frozen foods (e.g., French fries, chicken nuggets) 8-9 Frozen croquettes 7-8 Meatballs 7-8 Meat (e.g.
Time program function This function allows the selected hotplate to be switched off automatically after a preset time by inserting the cooking time. Once the time has elapsed How to rogram The hotplate turns off, there is a warning sound and the ‹ indicator lights up. Press the r symbol. The indicators go out and the sound stops. The hob should be switched on. To cancel or change the time 1. Select the required hotplate and power level. Select the hotplate with the μ symbol.
Indicator Function ™ˆ Power-Management function ‹ = Deactivated.* ‚ = 1,000 W. minimum power. ‚ = 1,500 W. ƒ = 2,000 W. etc. Š or Š. = maximum power of hob.** ™‹ Return to basic settings ‹ Personal settings.* ‚ Return to factory settings. *Factory settings **The hob's maximum power depends on the configuration of the installation's connection intensity.
Fixing malfunctions Malfunctions are commonly due to small details. Before calling the Technical Assistance Service, you should consider the following advice and warnings. Indicator Malfunction Solution none The electric power supply has been interrupted. Use other electrical appliances to check whether there has been a power cut. The appliance has not been correctly connected according to the connection diagram.
After-sales service Our after-sales service is there for you if your appliance should need to be repaired. We are committed fo find the best solution also in order to avoid an unnecessary call-out. E number and FD number: Please quote the E number (product number) and the FD number (production number) of your appliance when contacting the after-sales service. The rating plate bearing these numbers can be found on the appliance certificate.
Robert Bosch Hausgeräte GmbH Carl-Wery-Straße 34 81739 München DEUTSCHLAND 00 (910804)