operation manual

English | 19

Bosch Power Tools 2 609 007 771 | (28.2.14)

Symbols

The sticker regarding operation of the fine-spray system is located on the base station.

The correct interpretation of the symbols helps you operate the fine-spray system better

and more safely.

Symbols and their meaning Detailed description

See “Intended Use”, page 20.

The fine-spray system is

suitable for glazes and lac-

quers and for wall paints.

“Wood” application:

Spraying solvent-based and wa-

ter-dilutable lacquers, glazes,

primers, clear lacquers, wood

stains and oils

“Wall” application:

Spraying emulsion and latex

paints

See “Changing the Nozzle

Cap”, page 21.

Step 1:

Choose the correct nozzle

cap

Choose the grey nozzle cap 10

for a “wood” application

Choose the white nozzle cap 9

for a “wall” application

See “Adjusting the Spraying

Capacity”, page 22.

Step 2:

Set the spraying capacity

Select setting 1, 2 or 3 on the

thumbwheel 4 for a “wood”

application

Select setting 3, 4 or 5 on the

thumbwheel 4 for a “wall”

application

See “Adjusting the Air Flow”,

page 23.

Step 3:

Set the air flow

Set “wood” application on the

sliding switch 24

Set “wall” application on the

sliding switch 24

OBJ_BUCH-2024-002.book Page 19 Friday, February 28, 2014 9:28 AM