User manual

92 en | Glossary NurseCall Main Unit
953.92 | v1.0 | 2007.07 User Manual TeleAlarm SA®
I
Installer Persons who are authorized by their training to perform the installation of your system.
L
Local Acknowledgement at the NurseCall Main Unit or Relay Unit.
Acknowledgement
Localization Mode Special mode used to send the transmitter position.
M
Main Unit Receiver unit used to manage and store the alarms and messages arriving from NurseCall
Transmitters.
Message Signal transmitted to a receiver for information (for example, "DOOR").
N
Night Time duration defined between Night starting time and Night end time.
During the Night, the alarms are transfered to the paging group 24.
NurseCall Your smart system.
P
Parameter A user-adjustable value that governs some aspect of a device's performance
(Example, Night starting time).
R
Receiver Unit Main Unit or Relay Unit.
Relay Unit Receiver unit used to improve radio reception range.
Reserve Call Alarm sent to ask for help (N46, Call for Help 2).
T
Technical Alarm Alarm triggered by activating a contact in the N46.
Transmitter A device used for the generation of signals of any type and form that are to be transmitted.
U
User Persons who are authorized by their training to use the NurseCall system.