User manual

NurseCall Main Unit Appendix | en 81
TeleAlarm SA® User Manual 953.92 | v1.0 | 2007.07
Change Day / Night
If you have activated the change Day / Night, the NurseCall system transfers all Alarms during
Night to the group 24. At Day, all groups 00 - 24 can be used. When switching from Day to Night
or vice versa, the Message "DAY-NIGHT" is transmitted to the activated pagers to signalize the
change.
Priority Alarms
The Assistance and Fire Alarms are priority calls transmitted to all activated pagers.
Call repetition
If Alarms/Messages are not acknowledged after about 7 minutes, call repetitions are also sent
to the group 23.
13.5.3 DeTeWe protocol
Only Alarms/Messages arriving to the Alarm Buffer are transmitted (except "RELAY OFF"). The
transmission is fully alpha-numeric. The Alarms/Messages are repeated every 1 or 3 minutes
until Acknowledgement (see Section 7.4.13 RS232 message setting (toggle), page 55).
The Alarms/Messages are transmitted to the paging system user number attributed to the
Transmitter (default group = 00).
i
NOTICE!
Data rate: 9600 Bauds. Transmission: asynchronous with a 10 bit-structure
(1 startbit, 8 databits with odd parity, 1 stopbit) in half-duplex mode.
Group User number
00 x00
01 x01
02 x02
03 x03
04 x04
05 x05
06 x06
07 x07
08 x08
09 x09
10 x10
11 x11
12 x12
13 x13
14 x14
15 x15
Table 13.8 Attribution table