Manualshelf

User manual

ManualsBrandsBosch ManualsConsumer electronicsNurseCall Main Unit
51525354555657585960
NurseCall Main Unit Programming | en 59
TeleAlarm SA® User Manual 953.92 | v1.0 | 2007.07
7.5.5 Acknowledgement Transmitter programming
1. Select the Acknowledgement Transmitter type
with (to scroll up) or (to scroll
down). Then, confirm with .
2. Press to program the Transmitter.
3. Press the radio button of the Transmitter.
X If the Transmitter is not accepted, see
Section 9 Troubleshooting, page 65.
X See also Section 7.4.10 Maximum number of
Acknowledgement Transmitters (toggle),
page 55 to program this value to 5 or 32.
7.5.6 Acknowledgement Transmitter checking
1. Select the Acknowledgement Transmitter type
with (to scroll up) or (to scroll
down). Then, confirm with .
2. Press to check the Transmitter.
3. Press the radio button of the Transmitter.