Manualshelf

User manual

ManualsBrandsBosch ManualsConsumer electronicsNurseCall Main Unit
51525354555657585960
56 en | Programming NurseCall Main Unit
953.92 | v1.0 | 2007.07 User Manual TeleAlarm SA®
7.5 Transmitters
7.5.1 Generalities
X To access the Transmitters programming, press then .
7.5.2 Alarm Transmitter programming
1. Select the Alarm Transmitter type by pressing
(to scroll up) or (to scroll
down). Then, confirm with .
2. Press to program the Transmitter.
3. Press the radio button of the Transmitter.
X If the Transmitter is not accepted, see
Section 9 Troubleshooting, page 65.
4. Enter the value for the floor, the room and
for the bed or a single number. Confirm each
value with
.
5. Enter the pager group value.
6. Confirm the value with
.
X See also Section 7.4.9 Maximum number of
Alarm Transmitters (toggle), page 54 to
program the maximum number of Alarm
Transmitters (300 or 500).