User manual

NurseCall Main Unit Programming | en 45
TeleAlarm SA® User Manual 953.92 | v1.0 | 2007.07
7.3.4 Programming the interface language
1. Select the parameter No. 00.
2. Press
.
3. Select the language with the
 and
 keys.
4. Confirm the language selected with .
7.3.5 Date and time setting
1. Select the parameter No. 01.
2. Press
.
3. Set the month with the  and 
keys.
4. Go to the day with the
 key.
5. Set the day with the  and  keys.
6. Go to the year with the  key.
7. Set the year with the  and  keys.
8. Same operation for the time setting
(HH:MM:SS).
9. Confirm the setting with .
i
NOTICE!
This setting is also done during the first use.
X See also Section 7.2 First use, page 37.
i
NOTICE!
You have the choice between 6 languages:
–0 = English
–1 = French
–2 = German
–3 = Italian
–4 = Dutch
–5 = Swedish
X Parameter Nr. 00
Language £
X Language 0
English £
X Parameter
Stored !
X Parameter Nr. 01
Date and Time ¡
X Date and Time
M·.DD.YY HH:MM:SS¡
X Date and Time
MM.D·.YY HH:MM:SS¡
X Date and Time
MM.DD.Y· HH:MM:SS¡
X Parameter
Stored !