User manual

38 en | Programming NurseCall Main Unit
953.92 | v1.0 | 2007.07 User Manual TeleAlarm SA®
7.2.2 Language
This step allows to select the interface language.
X See Section 7.3.4 Programming the interface
language, page 45 for more details.
7.2.3 Localization Mode
This step allows to switch OFF or ON the indica-
tion of the Transmitter position (Localization
Mode) on the NurseCall Main Unit display.
X Press
 to activate the Localization Mode or
press
to disable this function.
7.2.4 Display Mode
This step allows to select the Display Mode for the
Transmitters identification.
X Press
 to select FL,RO,BE (floor, room,
bed) or press
to select NUMBER (Single
Number).
X Language 0
English £
i
NOTICE!
It is mandatory to perform a reset if you wish to change the value for the Localization Mode.
X See also Section 7.4.2 Resetting all parameters (including date and time), page 51.
LOCALIZATION ?
(OFF/ON )
i
NOTICE!
It is mandatory to perform a reset if you wish to change the value for the Display Mode.
X See also Section 7.4.2 Resetting all parameters (including date and time), page 51.
DISPLAY MODE ?
(NUMBER / FL,RO,BE)