User manual

32 en | Installation NurseCall Main Unit
953.92 | v1.0 | 2007.07 User Manual TeleAlarm SA®
6.2.7 Setting the jumpers on RS-232 board
Fig. 6.5 Setting the jumpers for DECT phone system
Fig. 6.6 Setting the jumpers for Alarm Management Software or NPS programming
Fig. 6.7 Setting the jumpers for printers and paging systems
i
NOTICE!
By default the jumpers are set for connection to DECT phone system.
DECT
The 4 jumpers are
mandatory
Alarm Management
Software or NPS
programming
Only these 2 jumpers
are mandatory
Printer
and
paging
Only these 2 jumpers
are mandatory