User manual

30 en | Installation NurseCall Main Unit
953.92 | v1.0 | 2007.07 User Manual TeleAlarm SA®
6.2.5 Connecting to the mains
The NurseCall Main Unit is powered by an adaptor (230 or 115/10VAC).
The power adaptor should be plugged in a socket-outlet placed near the unit and should be
easily accessible at any time.
The cable is connected to the modular contact labelled 10V AC (1), under the unit.
Fig. 6.3 Bottom view
X For connector wiring, see Section 13.7.2 Power socket (unit bottom), page 86.
CAUTION!
In case of a different supply, the equipment must fulfil isolation requirements according to
EN60950 standard (fourth edition or later).
1