User manual

28 en | Installation NurseCall Main Unit
953.92 | v1.0 | 2007.07 User Manual TeleAlarm SA®
6.2 Installation
6.2.1 Generalities
X Install the NurseCall Main Unit in a dry place, away from any source of heat.
Tools
– Torx T20 screwdriver.
6.2.2 Installation on a piece of furniture
It is recommended to place the NurseCall Main Unit on a non-sliding surface. However, do not
place anything (blanket, etc.) on top of the unit.
6.2.3 Wall installation
You can fasten the NurseCall Main Unit on a smooth wall surface using two screws (distance
between holes, 157 mm).
Power and line cords should be placed inside the channels on the bottom of the NurseCall
Main Unit.
CAUTION!
Interferences
Avoid immediate proximity to other electric devices such as a television.