User manual

NurseCall Main Unit Installation | en 27
TeleAlarm SA® User Manual 953.92 | v1.0 | 2007.07
6 Installation
6.1 Unpacking
The NurseCall Main Unit is carefully packed for transportation.
The components contained in the box are protected, but should be handled with care.
Store the packaging material for further use (storage or transport).
In case of defective or missing equipment, do not try to install the NurseCall Main Unit.
X Contact immediately your local representative.
1. Take all components out of the box and place the NurseCall Main Unit on the working
space.
2. Check each component in the box, in accordance with the list of contents below.
3. Check that the NurseCall Main Unit and its accessories have not been damaged during
transportation.
6.1.1 List of contents
Reference Description
NC.020.FI NurseCall Main Unit
A 058 Power supply adaptor (Europe)
230VAC/10VAC
or
400-230/10 Power supply adaptor (UK)
230VAC/10VAC UK
or
400-115/10 Power supply adaptor (US)
115VAC/10VAC
A120 Antenna 434MHz 1/2 L=34 cm FME
A121 Straight adapter BFME-TNC
A122 Right angled bended adapter BFME-ETNC
C1239 2 m Cable FCC 6/4
953.92 NurseCall Main Unit User Manual
953.120 NurseCall - General Overview
Table 6.1 Packing list