User manual

14 en | Safety Instructions NurseCall Main Unit
953.92 | v1.0 | 2007.07 User Manual TeleAlarm SA®
1. Switch off the NurseCall Main Unit using the main switch under the casing.
2. Unplug the power supply adaptor.
3. Dry up the NurseCall Main Unit.
4. Clean the NurseCall Main Unit.
5. Check its electrical functions.
3.4.1 Observation and information
In case of defective operation or any other technical incident for which no remedy is
described in this manual, please contact immediately your local representative.
3.5 Special safety instructions
Appropriate safety instructions linked to specific risks are described in the corresponding sec-
tion of this manual.
CAUTION!
Never let any liquid enter the system. In case of liquid spill inside the NurseCall Main Unit, act
immediately as follows:
i
NOTICE!
For further information, please contact your local representative.