Specifications

PLC - Remote maintenance
9
Programming of S5- and S7-PLC’s via telephone from afar
secured modem-protocol, no additional software needed
UMTS- / VPN- / internet-service
also for PLC’s with ProfiNet
SMS and fax sending directly from S7-300/400 (no PLC-programming necessary)
analogue modem couples automatically via ISDN
with integrated CP-343-1 / 443-1 functionality
Ethernet also for router function
PCMCIA-slots (only for version -H) for extensions (memory cards / specific modem cards (GSM) / WLAN)
compatible to the forerunner model (TELE-Prof / TELE-Book / TELE-Link)
also as TCP/IP-router
S7-variables display via Web-Browser
S7-remote maintenance with MPI-Interface
S5-remote maintenance (access to every S5 direct / via H1, L1, L2 and KOR/MUX)
integrated telephone directory
call-back of partner possible
software-update via PC (LAN) respectively from device to device possible
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
Power consumption:
15 watt
Display:
expressive LCD display
5statusLEDs
Handling/Configuration:
integrated keypad
WEB-Browser
Interfaces:
to the PLC:
PPI/MPI/Profibus interface: 9,6 KBd - 12 MBd
TTY/20mA current loop (AG-TELE aktiv, PLC passiv)
RS232: 9,6 KBd - 115,2 KBd / fully assigned
to the PD/PC:
10/100BaseTX RJ45-ethernet jack
TTY/20mA current loop (100 % mechanically and electr. compatible)
RS232: 9,6 KBd - 115,2 KBd / with a 1on1-cable to the PC
others:
2xUSB, 2xPCMCIA (only for version -H)
Integrated modem:
33K6 HIGH-SPEED, V.42/BIS MNP5 analogue modem
ISD N (E uro IS DN + 1TR6 )
Operating temperature:
5 - 55°C
Case:
powder coated metal case with mounting flange and DIN-rail mounting
Dimensions:
Flat 300 x 175 x 70 mm
Hoch 67 x 280 x 170 mm
Remote maintenance / telecontrol of PLC
Access to the connected PLC takes place by coupling via Analogue-,
ISDN-, mixed Analogue-ISDN-, GSM-, UMTS-line and also via Internet
with and without VPN-security.
Analogue and ISDN - how do they come together?
You have on the plant side only ISDN for telephone, but in your office there
is only an analogue system? No problem, you have to install on the clients
side the TP-II and activate there the analogue-emulation in the device. No,
the modem signals will be send digitalized over ISDN and you can
connect to it. So, you will be able to communicate though the telephone
systems are different and your client isn´t forced to install an analogue
connection.
Router
−
Mode (access to the network without router)
The Tele-Prof-II can also be used as a router for access from a PC via
dial-up connection, so that a communication with the behind covered
network results. Furthermore a network connection can be made with the
TP-II <=> TP-II-line, but in doing so the IP-address-root must differ.
User dependant network access
You have PLC/LAN-participants different supplier in your network and
everybody should have access to this network? No problem, you give
every supplier a VPN-username and passwort, define in the destination
device a user-dependent network-access and after positiv login he only
can communicate to the released ip-addresses.