Specifications

Zubehör

9191

SPS - Kommunikationstreiber

Zubehör

Visualisierung / OPC-Server

SPS - Kommunikationstreiber

Programming/controlling of S5/7[FREEWARE without

support]-PLC’s

If you have to accomplish modifications in your installation, connect the

Remote maintenance of a S7-PLC[FREEWARE without support]

You have to solve a problem in the PLC-program, but the installation is

not placed nearby? No problem, start your PG-2000-software with "option

teleservice", activate your modem and after selection intra PG-2000-

software access to the PLC is possible as if being on-site.

PC with the PLC and start your programming package PG-2000. With

this software you have one and the same user interface for S5 and

S7[FREEWARE without support], so you don’t have to switch between

both versions, just as it is with most of other packages.

Data logging of your PLC

You shortly need a logging of your PLC’s operating states respectively

are on the way of figuring out a problem and have no datalogger? No

problem, connect the PC, start the PG-2000-software with "option

datalogger", define relevant variables, appoint timestamp and then the

recording starts running immediately. The data will be stored on the fixed

disc according to the configuration.

Backup of formulas without knowledge of PLC

You consistently have to back up formulas which are stored in data blocks

or back up production protocols, but the employee in charge has no

knowledge of PLC-programming respectively handling PC-programs? No

problem, install the PG-2000-software with "option DB-backup" on your

PC and connect it with the PLC. The employee only has to click on a

symbol on the desktop of the PC and the data blocks of the

parameterised PLC will be stored on the fixed disc. Afterwards the

program closes itself and the mentioned employee didn’t had to

accomplish an intervention on the program.

Project/history-administration of PLC-programming

Who doesn’t know this? When accessing the PLC you find out that parts

of the program flow has been changed and none of the

colleagues/employees are responsible for it? Therefore install the "option

controller" for the PG-2000-software, and every activity of the employees

working with the program will be recorded. So you can identify the one

employee very quickly and changes are ex post comprehensible, too.

STEP5 / STEP7 - programming