Specifications

29
smallest ethernet-gateway with PD-socket, multifunctional, 1 adapter for all PPI, MPI and Profibus
applications
with ext. 24V-connector
automatic protocol- and baud rate detection
firmwareupdate via internet for free
PPI - adapter for S7 - 200
MPI - adapter for S7 - 300 + 400
CE/EMC compliant construction
applicable with original Siemens programming software by included software
power supply from the S7-PLC or external
network configuration free adjustable
VPN remote maintenance possible / for the maintenance of the PLC via Internet
with full PD – diagnosis socket
coupling of two PLC's S7 - S7 / S7 -S5 is possible with the Gateway type
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
Power consumption:
2watt
Display:
Web-Browser
2status-LEDs
Handling/Configuration:
Web-Browser
Kabelmanager-Software
Interfaces:
to the PLC:
PPI/MPI/Profibus interface: 9,6 KBd - 12 MBd
to the PD/PC:
PD/diagnosis jack
10/100BaseTX RJ45-ethernet jack
Galvanic separation:
1500V PPI/MPI/Profibus to the PC
Operating temperature:
5 - 55°C
Case:
ABS-plastic case
Dimensions:
65 x 43 x 17 mm
Programming of S7-PLC-devices via LAN
You would like to respond to your S7-PLC-device via LAN but not
integrate an Ethernet-CP? No problem, plug the S7-LAN or also the
MPI-LAN-cable on the MPI/PPI/Profibus-interface and access via LAN.
Watching of S7-PLC-devices via LAN without Ethernet-CP
Your panel only has a LAN-socket as PLC-interface? No problem,
connect this socket with the S7-LAN or the MPI-LAN-cable and plug it
directly on the PPI/MPI/Profibus of the PLC. Then access to the variables
and data of the PLC is already available.
S7-CP-replacement (without LAN-CP to the PLC-device)
Do you have a S7-PLC-device without CP243-1, CP343-1 or CP443-1
and would like to connect via LAN? Then plug the S7-LAN on the
PLC-device and your access via RFC1006 is ready for use.
Remote maintenance of your S7-PLC-device via LAN / Internet
You have access to a on-site network and your PLC-device has no
LAN-connection? No problem, plug the S7-LAN on the PLC-device and
you will have immediate access to the PLC from afar.
S7 - interface cables