Specifications

28
Wireless programming with a S7-LAN directly at the laptop or in the corporate network
Connecting a network subscriber via WLAN to an Access Point
To link to a S7-PLC a S7-LAN is a needed
Ad-hoc capable for direct programming with the laptop
Auto-negotiation of the RJ45-Ethernet jack
Power supply from the S7 controller or external; while configuration from USB of the connected PC
with full PG - diagnostic socket
simply parameterizing via USB
CE / EMC compliant design
also for S7-1200 usable
Technical Specifications:
Requirement:
programming tool from LAN to MPI/Profibus
like S7-LAN or MPI-LAN is required!
Supply voltage:
24V/DC +/- 20%
5V/DC USB
Power consumption:
1,2 watt
Display:
2status-LEDs
Handling/Configuration:
S7BridgeConfig-software
Interfaces:
to the S7-LAN:
10/100BaseTX RJ45-ethernetplug
to the PD/PC:
9pin PD/diagnosis jack
WLAN connection (802.11 b/g)
Mini-USB-B-jack (for Configuration)
Operating temperature:
5 - 55°C
Case:
ABS-plastic case
Dimensions:
65 x 43 x 17 mm
Without LAN-cable round of the PLC
Your’re right in the middle of your production line and and should move
around the machine and simultaneously observe / manage. No problem,
you parameterize the S7-WLAN-Bridge, connect to the S7-LAN and
connect to an access-point or with the ad-hoc-network of your laptop and
are ONLINE on the PLC.
article:
Art. ID. name price
9352-S7-WLAN-Bridge S7-WLAN-Bridge
connection of a network client via WLAN to an Access-Point or in AdHoc-mode
needed accessories:
Art. ID. name price
9352-LANCON S7-LAN connector
Ethernetmodule for PPI/MPI/Profibus
accessories:
Art. ID. name price
9352-S7-WLAN-Bridge-ANT Magnetic base antenna for S7-WLAN-Bridge, WLAN-Klemme
cable length: 3m
9636-TCPIP.02M Patch-cable 0.25m, Cat5e, shielded
RJ45 plug <=> RJ45 plug, 1:1
9352.3 USB-cable plug/plug Type A-B-Mini 3m
USB 1.1 / 2.0 up to 480 MBit
S7 - interface cables