Installation manual

How to install
1. Install the DCNM‑APS or DCNM‑PS in a 19 inch device rack system or on a flat surface.
Two 19 inch mounting brackets and four bottom feet are supplied with the DCNM‑APS
and DCNM‑PS. Refer to the following illustration.
2. Connect all required cabling.
3. Connect the mains supply.
1
2
3
Figure 6.3: 19 inch rack, flat surface and feet mounting
Item
Description
1 19 inch rack mounting (bracket)
2 Flat surface mounting (bracket)
3 Feet mounting
Notice!
The device extends 30 mm in front of the 19” mounting brackets when installed in a 19” rack
system.
!
Caution!
Do not obstruct the airflow vents on the front side and rear left and right sides.
22 en | Mechanical installation of Central Equipment DCN multimedia
2013-08 | V1.0 | Hardware Installation Manual Bosch Security Systems B.V.