User`s guide

NetDVR | User’s Guide | Playback
46
Bosch Security Systems | 2004-01
Fitting the HDD in the cradle:
• Lift the handle and slide the HDD cradle
into the rack.
• Pull the handle down and ensure the cradle
seats correctly in the rack.
• Insert the key and turn clockwise to lock
the rack again. Locking also restores power
to the HDD.
Formatting the HDD:
• Start ‘NetDVR Configuration’.
• Click on the ‘HDD’ tab in the
‘Configuration’ program.
• Disable the HDD and click on the ‘Apply’
button.
• Select ‘HDD Enable’ but don’t click the
‘Apply’ button yet.
• When the ‘HDD Format’ button is
activated again, click the ‘HDD Format’
button.
• Confirm the request to format the HDD.
• When the HDD is formatted, click on the
‘HDD Enable’ button and next on the
‘Apply’ button.
A
B
NetDVR.book Page 46 Wednesday, May 12, 2004 4:06 PM