Technical data

20
Operation
6 720 617 760 (2008/09)
5.4.1 Changing the code (parameter: 5A p)
Setting range: 1 to 10
Use this parameter if you want to adjust the code after commis-
sioning:
B For systems with a single heating circuit: Select code 1.
5.4.2 Changing the heating circuit configuration
(parameter: 5b p)
Setting range: 1 to 3
Use this parameter if you want to alter the configuration after
commissioning:
B Adjusting the corresponding configuration:
– 1 = unmixed heating circuit
– 2 = unmixed heating circuit with additional accessory
(not availabe in UK).
– 3 = mixed heating circuit
Only one FR 10 can be used per heating system.