Technical data

Unpacking
– This equipment should be unpacked and handled with care. Check the exterior of the
packaging for visible damage. If an item appears to have been damaged in shipment,
notify the shipper immediately.
– Verify that all the parts listed in the Parts List below are included. If any items are
missing, notify your Bosch Security Systems Sales or Customer Service Representative.
– Do not use this product if any component appears to be damaged. Please contact Bosch
Security Systems in the event of damaged goods.
– The original packing carton is the safest container in which to transport the unit and must
be used if returning the unit for service. Save it for possible future use.
!
Caution!
Take extra care lifting or moving MIC440 cameras because of their weight (15.5 kg (34.17
lb)).
Parts List
Quantity Part
1 MIC440 with Exd DCA attached
1 Quick Installation Guide
1 MIC Series 440 Installation Manual
1 USB to RS-485 converter kit
4 M3 x 25 mm stainless screws
1 Nebar gasket
Additional Products Required
Mounting accessories are sold separately by Bosch. (Refer to the chapter Product Description
for a list.) Users must supply all wiring/cabling for power, video, and telemetry.
The following table lists additional products, sold separately by Bosch, required to operate
each MIC camera:
Quantity Product Part Number Size
1 per camera Shielded Composite Cable for MIC cameras
(See the model numbers and lengths at right.)
MIC-CABLE-2M 2 m
MIC-CABLE-10M 10 m
MIC-CABLE-20M 20 m
MIC-CABLE-25M 25 m
Quantity Product Part Number
1 per camera Power Supply Unit (PSU) for MIC cameras
MIC-240PSU-2,
MIC-115PSU-2,
MIC-24PSU-2
3
3.1
3.2
MIC440 Explosion-protected Camera Unpacking | en 13
Bosch Security Systems, Inc. Operation Manual 2013.11 | 8.1 |