Data Sheet

Video | MIC Mounting Brackets and Other Accessories
MIC Mounting Brackets and Other
Accessories
www.boschsecurity.com
u Full range of mounting brackets and other
accessories.
u Designed to integrate seamlessly with the MIC
family.
u Provides a best-fit solution for virtually any
application.
u Easy to use and install.
u Accessories extend functionality.
Bosch Security Systems offers a range of mounting
brackets and accessory products for the MIC family of
cameras. The mounting brackets (for corner, wall, and
pole mounting) are available in the standard colors of
the MIC family, including stainless steel. (Not all colors
of mounting brackets are available for all models of
MIC cameras.) The accessories have been designed to
work seamlessly with MIC cameras to extend their
functionality for your application. This datasheet
provides an overview of the available MIC accessories.
System overview
Mounting Accessories
Deep Conduit Adapter
The MIC Deep Conduit Adapter (MIC-DCA) is designed
to allow a weatherproof conduit or cable gland to be
fitted to protect the signal cables. Manufactured from
either solid aluminum or stainless steel, the MIC-DCA
has two M25 holes, one in the base and one in the
side.
An O-ring seals the camera-to-mount interface to an
ingress rating of IP68.
Supplied hardware includes:
• Four (4) M8 x 20 stainless steel hex bolts
• Four (4) M8 stainless steel plain washers
• One (1)O-ring, 80 mm x 3 mm
• One (1) end cap/blanking plug, M25 x 1.5, with O-ring
Deep Conduit Adapter, Hinged
The MIC Hinged DCA (MIC-DCA-Hx) is deeper than the
conventional DCA and provides a convenient mounting
point for a MIC7000 camera. Manufactured from solid
aluminum, the MIC-DCA-Hx has two M25 holes, one in
the base and one in the side, and (in specific regions)
includes a conduit adapter (male M25 to female 3/4"
NPT).