Spec Sheet

Supplied hardware includes:
• Eight (8) 25 mm knurled stand-offs, M4 x 12
(external), M3 x 15 (internal) for MIC612)
• Eight (8) 28 mm smooth stand-offs, M4 x 12
(external), M3 x 15 (internal) (for MIC412)
• Eight (8) M3 x 10 stainless steel hex bolts
• Eight (8) M3 stainless steel plain washers
Sunshield Kit for MIC440 cameras
The Sunshield Kit for MIC440 cameras
(MIC440SUNSHIELD) includes two (2) white, molded
shells.
Supplied hardware includes:
• Four (4) M6 x 12 stainless steel socket head screws
USB to RS-485 Converter
The MIC USB to RS-485 signal converter
(MICUSB485CVTR2) is a compact unit that
communicates from a PC’s USB port directly to a MIC
analog camera via the telemetry connector in MIC
power supplies. The converter allows connection
between MIC analog cameras and either Bosch’s
Configuration Tool for Imaging Devices (CTFID)
software (for MIC550, MIC550IR, MIC612) or Bosch
Universal Camera Setup software (Camset) (for MIC
models 400AL, 400IR, 400ST, 412, 440, and 500).
Each software application provides full control of all
camera setup and operation functions. The converter
and Camset software are supplied with MIC440 and
MIC400ST. The converter is an available accessory for
analog models MIC550, MIC550IR, MIC612, and later;
CTFID is available for download from
www.boschsecurity.com.
Biphase Converters
The MIC Biphase converter cards allow up to eight
MIC cameras to be interfaced with Bosch Biphase
compatible equipment. The card translates Bosch
Biphase protocol to RS-485, half duplex telemetry
signals. It also allows the camera address to be set
through its integrated DIP switch selector.
The MIC-BP3 has its own enclosure (rated IP65) with
its own power supply, which enables it to be used by
MIC power supplies that do not have an available
expansion slot.
The MIC-BP4 is a plug-in card that fits into an available
expansion slot within a non-infrared MIC power supply
unit.
Alarm and Washer Pump Drive Card
The 8 Input Alarm Card (MIC-ALM) is designed to work
with a MIC power supply with a free expansion slot.
The MIC-ALM provides MIC cameras with eight alarm
inputs, a washer pump drive function with test/pump
priming capability and two additional relays, which can
be configured to operate external equipment when an
alarm signal is received. The card is compatible with
non-infrared MIC power supply units. (The card cannot
be used with a MIC IR power supply.)
Washer Kits
The MIC washer kits (MIC-WKT, MIC-WKT-IR) provide
the necessary components to allow connection of a
washer pump and water reservoir tank to a MIC
camera, and control via the camera telemetry.
Supplied hardware includes:
• One (1) washer jet nozzle
• Two (2) mounting brackets for the washer jet nozzle
The MIC-WKT kit also includes a washer pump drive
card (MIC-WSH), which fits into an empty expansion
slot of the non-IR MIC power supply units and provides
electrical connections, a washer pump relay, and a
Push to Test / pump prime function.
Note: The washer pump drive function is built-in to the
MIC infrared (IR) power supply units.
Replacement Wiper Blades
The model MIC-RWB is a pivoting, metal-backed
rubber wiper blade (36 mm x 13 mm x 3.5 mm) for
MIC400 cameras. Models MIC-412-RWAB (black) and
MIC-412-RWAC (silver) are completely anodized
aluminum wiper arms with a fixed long-life silicone
wiper blade and associated hardware.
4
| MIC Mounting Brackets and Other Accessories