Spec Sheet

Safety EN 60950-1
EN 60950-22
UL 60950-1, Ed. 2
CAN/CSA C22.2 No. 60950-1-07, Ed. 2
EN 62368-1
UL 62368-1
Marks cUL, CE, WEEE, RCM, EAC, FCC, RoHS
ISO Quality Systems ISO 9001
ISO 14001
Installation/configuration notes
Interfaces for MIC IP fusion 9000i camera
The camera has been designed for quick and easy
installation, a key feature from Bosch IP video security
products.
The camera can be powered using a standard 24 VAC
power source and/or by a network-compliant 95W
High Power-over-Ethernet (Bosch’s version of High
PoE). With a 95W High PoE Midspan (NPD-9501A, sold
separately) from Bosch, a single (Cat5e/Cat6e) cable
connection provides everything needed to view,
power, and control the camera. Using High PoE makes
installation easier and more cost effective, as cameras
do not require a local power source.
Easy setup is guaranteed by using or Configuration
Manager or the web browser built into the camera.
Access to all settings, live video, and control functions
is available in a user-friendly web page format.
Technical specifications
MIC IP fusion 9000i cameras are available with
different housing colors, two thermal imager
resolution options, and thermal frame rate options.
The last three letters of the model number identify the
housing color (“B” (black), “W” (white), or “G” (grey)),
the resolution, and the thermal frame rate. In the table
below, “x” represents the letter for the housing color.
Note: Some models are not available in all regions.
Model
Resolution Frame rate
MIC-9502-Z30-xQS 320 pixel (Standard) <9Hz
MIC-9502-Z30-xQF 320 pixel (Standard) 60Hz
MIC-9502-Z30-xVS 640 pixel (High) <9Hz
MIC-9502-Z30-xVF 640 pixel (High) 30Hz
Notice
All thermal camera models are export-controlled
by the U.S. Department of Commerce (USDoC).
Depending on country of installation and
application, an export license may be required.
For more information, contact your local Bosch
Security Systems Customer Service Center.
Additional camera models with different combinations
of housing color, resolution, and frame rate may be
available. If you need a model not listed in the
Ordering Information section, contact your local
Bosch representative.
Thermal camera core, standard resolution (320
pixels)
Imager Focal Plane Array (FPA), un-cooled
Vanadium Oxide microbolometer
Resolution/Effective
Picture Elements
320 x 240
Pixel Pitch 17 μm
Frame rate <9Hz (“QS” models)
60Hz (“QF” models)
Lens Athermal 19 mm (F1.1)
Field of View (FOV) 16° x 12°
Spectral Response 8 to 14 μm
Thermal Sensitivity
(NEDT)
<62mK (at room temperature; Noise
Reduction ON)
Focus Factory-set at infinity
Focus Distance 14 m to ∞ (46 ft to ∞)
Contrast enhancement On/Off
Gain Level User-adjustable
Brightness Level User-adjustable
Noise reduction On/Off
User-selectable thermal
color modes
12
5 | MIC IP fusion 9000i