Operation Manual

You can obtain additional information to help when you troubleshoot or fine-tune the unit. The
values indicate the proportions of the individual functions on the encoder load, shown as
percentages.
4 Move the cursor over the graphic indicator. Some additional numerical values are also
displayed.
Image Selection
You can view the image of the camera in different displays.
4 Click one of the tabs Stream 1, Stream 2, or M-JPEG below the video image to toggle
between the different displays of the camera image.
View Control
View Control
The View Control tab allows you to control camera functions (pan, tilt, zoom, focus, and iris),
navigate through on-screen menus and to view preset scenes (shots).
Ref # Description Ref # Description
1 Tilts the camera up 8 Focus far²
2 Tilts the camera down 9 Focus near²
3 Pans the camera to the left 10 Iris close²
4 Pans the camera to the right 11 Iris open²
5 Pans and tilts the camera in all
directions
12 Sets the pre-set scene for the
corresponding button 1, 2, 3, 4, 5 and 6
6 Zoom out¹ 13 Moves the camera to pre-set scene
numbers 1, 2, 3, 4, 5 and 6
7 Zoom in¹
16.1.1
90 en | Operation
MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc.