Installation Manual

Vue d'ensemble des étapes d'installation
Pour installer votre caméra MIC, suivez les étapes suivantes dans l'ordre.
Remarque : en fonction de votre modèle de caméra, de votre choix d'emplacement de
montage et d'orientation, ainsi que des supports de fixation et des accessoires de caméra que
vous avez choisis, vous n'aurez peut-être pas à effectuer chaque étape.
Determine system
configuration.
Operate the camera.
(Refer to Section 16.)
Connect network cable
(Refer to Section 10.)
Install
illuminator.
Install
sunshield.
Configure settings.
(Refer to Section 13.)
Alarm/Washer
Interface Unit
VIDEOJET connect
PSU
Cant the camera.
(Refer to Section 11.)
Install cabling between power
source and camera mounting site.
Install MIC Camera.
(Refer to Section 9.)
Power supply source
or PoE device
Connect and configure
camera in box or
on table-top stand.
(Refer to Sections 5 & 6.)
Install optional accessories.
(Refer to individual installation manuals.)
Select mounting
location and
orientation.
(Refer to Section 7.)
Install mounting
accessories and
conduit (if applicable).
Identify required
mounting accessories.
(Refer to Section 8.)
Identify Mounting Site Requirements.
Install a
sunshield?
YES
YES
NO
NO
Will
camera
be canted?
Pre-
configure
camera?
NO
YES
YES
NO
Install
optional
camera
access-
ories?
3
MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
Vue d'ensemble des étapes d'installation | fr
33
Bosch Security Systems Quick Installation Guide 2014.06 | 1.0 | F.01U.291.521