Specifications

Data sheet
BMA220
Page 56
BST-BMA220-DS003-08 | Revision 1.15 | August 2011 Bosch Sensortec
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to
third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.
9.4 Marking
9.4.1 Mass production samples
Labeling Name Symbol Remark
Lot counter CCC
Product number T T = 2
Sub-con ID L
1 digit alphanumerical, code to identify sub-con
and plant , L = A or L = U or L = P
Pin 1 identifier
•
Figure 35: Marking of mass production samples
9.4.2 Engineering samples
Labeling Name Symbol Remark
Eng. sample ID N
Engineering Samples are always marked with
N = “e”
Date code WW calendar week
Lot counter CC e.g. Eng. marking F1, F2 … C1, C2
Pin 1 identifier
•
Figure 36: Marking of engineering samples
CCC
TL
NWW
CC