Instruction manual

8561 | Instruction Manual | Unpacking
EN
|
7
Bosch Security Systems | 30 January 2004
1UNPACKING
Unpack carefully. This is electronic equipment and
should be handled carefully.
Check for the following items:
• LTC 8561 Series, LTC 8564/20, or LTC 8566 Series
Receiver/Driver.
If any items appear to have been damaged during
shipping, contact the shipper. If any items are missing,
notify your Bosch Security Systems, Inc. Sales
Representative or Customer Service Representative.
The shipping carton is the safest container in which the
unit may be transported. Save it for possible future use.
2SERVICE
If the unit ever needs repair service, the customer
should contact the nearest Bosch Security Systems, Inc.
Service Center for return authorization and shipping
instructions.
Service Centers
USA
Phone: [phone] or 717-735-6638
fax: [phone] or 717-735-6639
CCTV Spare Parts
Phone: [phone] or 408-956-3853 or 3854
fax: [phone]
e-mail: [e-mail]
Canada
Phone: [phone]
Europe, Middle East & Asia Pacific Region
Phone: [phone]
For additional information, see
www
.boschsecuritysystems.com.
3DESCRIPTION
The LTC 8561 Series, LTC 8564/20, and LTC 8566
Series On-site Receiver/Drivers are control data
decoder units and motor drivers for pan/tilt units and
lenses. These receiver/drivers are used in conjunction
with the Allegiant
®
Series Microprocessor-based
Switcher/Controller Systems.
3.1 Power
Model No. Rated Voltage Pan/Tilt, Aux 1,
Voltage
1
Range & Aux Supply
LTC 8 5 61/ 60
2
120 VAC, 100 to 130 120 VAC, 50/60 Hz
50/60 Hz
LTC 8 566/60
3,5
120 VAC, 100 to 130 24 VAC, 50/60 Hz
50/60 Hz
LTC 8 566/50
4,5
220–240 VAC, 198 to 264 24 VAC, 50/60 Hz
50/60 Hz
LTC 8 5 61/ 50
2
220–240 VAC, 198 to 264 220–240 VAC,
50/60 Hz 50/60 Hz
LTC 8 564/20
2
24 VAC, 20 to 28 24 VAC, 50/60 Hz
50/60 Hz
1
Power (all models): 15 W at rated voltage (not including pan/tilt).
2
Fuse protected at 2 A.
3
Fuse protected at 1 A.
4
Fuse protected at 0.4 A.
5
For the LTC 8566/60 and LTC 8566/50, the maximum total current output, including
Pan/Tilt output, Auxiliary 1 output and Auxiliary Supply output, is 2 A.