Specifications

40 en | Unpacking Digital Video Quad Processor
F.01U.090.110 | 3.0 | 2010.04 User’s Guide Bosch Security Systems, Inc.
Power Input DC Power Jack * 75 Ohm termination is normally connected to the Video
Input. However if a loop through is connected this 75 Ohm
termination is switched out and termination must be
supplied by the downstream equipment.
Chassis Earth Phillips screw
Connectors (LTC2382/90)
Video Input: Fouw (4) BNC, with auto switched
75 Ohm
termination*
Video Output: Four (4) BNC, loop through*
Monitor Output: One (1) BNC, 75 Ohm output
impedance
PLAY IN: One (1) BNC, 75 Ohm termination
REC OUT: One (1) BNC, 75 Ohm output
impedance
ALM/RS232: 15-Way D-type, breakout terminal
block
Power Input: DC power jack
Chassis Earth: Phillips screw