Specifications

38 en | Unpacking Digital Video Quad Processor
F.01U.090.110 | 3.0 | 2010.04 User’s Guide Bosch Security Systems, Inc.
2.5.3 Restoring Factory Default Settings
At times you may have to restore the factory default settings to the unit. To restore defaults:
1. Press and hold the PLAY key before applying power to the video processor.
2. Connect the power cord (turn on power) while continuing to hold the PLAY key for 5
seconds.
Once the system resets the defaults, the monitor displays:
DEFAULTS DONE
The factory default values are as follows:
2.6 Maintenance
The LTC 2382/90 requires no routine maintenance and is designed for long and trouble-free
use under normal operating conditions. Repair should only be attempted by qualified
personnel.
TIME/DATE
Time/Date Not changed
Time Format 24 hours
Date Format MM/DD/YY
Display TOP 2
SEQ SETUP
Camera 1-4, Quad 2 seconds
ALARM SETUP
Alarm Inputs ON
Dwell Time 2 seconds
Alarm Input Polarities Normally Open (NO)
Video Loss ON for all video inputs
Relay ON for all inputs
Beeper OFF for all inputs
REC OUT MODE
Set up OUAD ONLY
CAMERA TITLES
Display Titles 1, 2, 3, 4
Display ON
COLOR ADJUST
Video Inputs AUTO
Contrast Nominal for all inputs
Brightness Nominal for all inputs
Border Color WHITE
SYSTEM SETTINGS
Language ENGLISH
Password Disabled
Text Color WHITE
Key Lockout OFF
Unit ID 000