Specifications

18 en | Unpacking Digital Video Quad Processor
F.01U.090.110 | 3.0 | 2010.04 User’s Guide Bosch Security Systems, Inc.
2.4 Programming the LTC 2382/90 Video Processor
The main difference between the LTC 2380/90 and the LTC 2382/90 video processors is the
ability to program the LTC 2382/90 via the front panel controls. The following figures illustrate
the front panels for both video processors.
Figure 2.16 LTC 2380/90 Front Panel
Figure 2.17 LTC 2382/90 Front Panel
2.4.1 LTC 2382/90 Front Panel Function Keys
All programming is done with the front panel keys. There are eight keys on the front panel.
Table 2.1 LTC 2382/90 Front Panel Function Keys
Key Label Operating Function Programming Function
PLAY Selects PLAY input for display
on monitor
NONE
MENU Selects the on-screen menu Enters the programming mode
SEQ ALM Selects the sequential
switching function and Alarm
Acknowledge
NONE
1 ^ Displays Camera 1 in Full-
screen mode
Scrolls up through program selections:
selects entries
2 Displays Camera 2 in Full-
screen mode
Scrolls down through program
selections: selects entries
3 < Displays Camera 3 in Full-
screen mode
Moves cursor to the left in menus; selects
entries
4 > Displays Camera 4 in Full-
screen mode
Moves cursor to the right in menus;
selects entries
Quad Return Displays Quad mode Return (Enter) or set function