Specifications

16 en | Unpacking Digital Video Quad Processor

F.01U.090.110 | 3.0 | 2010.04 User’s Guide Bosch Security Systems, Inc.

6. Connect both units (B and D) by attaching one (1) binding plate to the bottom of each

unit (E and F). Use the two (2) screws removed from the bottom of the units and two (2)

additional screws included with the rack mount kit. (Note that the illustrations shows a

gap between the two units for clarity, in actuality, there should not be a gap between the

units.)

Figure 2.11 Binding Plate Connected to the Bottoms of Both Units

7. Turn the connected units over and ensure that the front panel is towards you.

8. Remove the front and back inner screws from the tops of both units (G and H). Retain

these four (4) screws.

Figure 2.12 Top View of Connected Units