Specifications

GPRS/GSM IP Communicator Table of Contents | en 3
Bosch Security Systems, Inc. Installation and Operation Guide F01U133268 | 03 | 2010.05
Table of Contents
1 Introduction 5
1.1 Trademarks 5
1.2 Technical Specifications 5
1.3 Certifications and Approvals 6
1.4 Control Panel Compatibility 6
2Overview 7
2.1 System Overview 7
2.2 Device Overview 8
2.3 Modes of Operation 9
2.4 Configuration Options 10
3 Installation 11
3.1 Installation Prerequisites 11
3.2 Insert the SIM Card 12
3.3 Mount the ITS-DX4020-G in the Control Panel Enclosure 13
3.4 Connect the ITS-DX4020-G to the Control Panel 14
3.5 Check Signal Strength 17
4 Configuration 18
4.1 Use Short Message Service (SMS) to Configure the ITS-DX4020-G 18
4.1.1 Enter CONFIG MODE 18
4.1.2 Compose the Configuration SMS 19
4.1.3 Send the Configuration SMS 20
4.1.4 Exit from CONFIG MODE 21
4.2 Use USB to Configure the ITS-DX4020-G 21
4.2.1 Install the USB Driver 22
4.2.2 Install a Communication Program 24
4.2.3 Log Into the USB Interface 25
4.2.4 USB Main Menu 27
4.2.5 USB Option Menu 27
4.3 Polling Configurations 31
4.3.1 High Security Application (bank, jewelry store, UL fire, and so on) 31
4.3.2 Medium Security Application 32
4.3.3 Backup or Low Security Application (residential or other once-a-day reporting location) 33
4.4 SIM Card Data Usage 34
5Testing 35
5.1 GSM Trouble Indication 35
5.2 Firmware Version 35
6 Firmware Upgrade 36
6.1 Download the Latest Firmware 36
6.2 Install the Firmware 36
6.2.1 Install the Firmware using Hyper Terminal 36