OBJ_DOKU-15498-002.fm Page 1 Friday, August 6, 2010 10:30 AM WEU Robert Bosch GmbH Power Tools Division 70745 Leinfelden-Echterdingen Germany WEU Isio www.bosch-garden.com F 016 L70 633 (2010.
OBJ_BUCH-904-002.book Page 3 Thursday, August 5, 2010 2:57 PM 3| 4 3 2 4 5 6 1 3 2 5 6 1 7 7 4 8 4 9 3 2 1 10 5 6 7 11 12 F 016 L70 633 | (5.8.
OBJ_BUCH-904-002.book Page 4 Thursday, August 5, 2010 2:57 PM 4| A B 13 14 4 10 2 11 12 C 8 D 9 F 016 L70 633 | (5.8.
OBJ_BUCH-904-002.book Page 5 Thursday, August 5, 2010 2:57 PM 5| E F 7 15 7 5 G H 1 I 1 J 7 F 016 L70 633 | (5.8.
OBJ_BUCH-904-002.book Page 18 Thursday, August 5, 2010 2:57 PM 18 | English Safety Notes en Explanation of symbols Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Wear eye protection and stout shoes at all times while operating the machine. Pay attention that bystanders are not injured through foreign objects thrown from the machine. Keep bystanders a safe distance away from the machine.
OBJ_BUCH-904-002.book Page 19 Thursday, August 5, 2010 2:57 PM English | 19 b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool.
OBJ_BUCH-904-002.book Page 20 Thursday, August 5, 2010 2:57 PM 20 | English c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water.
OBJ_BUCH-904-002.book Page 21 Thursday, August 5, 2010 2:57 PM English | 21 f Take care against injury to feet and hands from the cutting means. f Keep the battery charger clean. Contamination can lead to danger of an electric shock. f Before any work on the machine (e. g. maintenance, changing the tool, etc.) as well as during its transport and storage, lock the On/Off switch in the off position. There is danger of injury when the On/Off switch is unintentionally actuated.
OBJ_BUCH-904-002.book Page 22 Thursday, August 5, 2010 2:57 PM 22 | English – Battery Charger – Pole cart (only with “grass shear & pole cart” set) – Grass shear blade (only with “shrub/grass shear” set) – Operating instructions 4 Battery charger 5 On/Off switch 6 Lock-off button for On/Off switch 7 SDS drive cover 8 Telescopic pipe When parts are missing or damaged, please contact your dealer.
OBJ_BUCH-904-002.
OBJ_BUCH-904-002.book Page 24 Thursday, August 5, 2010 2:57 PM 24 | English Declaration of Conformity Grass Shear We declare under our sole responsibility that the product described under “Technical data” is in conformity with the following standards or standardization documents: EN 60335 (battery powered product) and EN 60335 (battery charger) according to the provisions of the directives 2006/95/EC, 2004/108/EC, 2006/42/EC.
OBJ_BUCH-904-002.book Page 25 Thursday, August 5, 2010 2:57 PM English | 25 The battery charge-control indicator 2 indicates the charging progress. During the charging process, the indicator flashes green. When the battery charge-control indicator 2 lights up green continuously, the battery is fully charged. Operation During the charging procedure, the handle of the garden product warms up. This is normal. Press the lock-off button 6 and hold while actuating the On/Off switch 5.
OBJ_BUCH-904-002.book Page 26 Thursday, August 5, 2010 2:57 PM 26 | English Cutting Hedges (shrub shear only) Before cutting check the hedge for foreign objects e. g. wire fences. Cut stems up to 8 mm in thickness. When cutting, move steadily along the line of cut, so that stems are fed directly into the cutter blades. The double edge of the cutting blade enables cutting to either direction, or with a side to side motion. After use replace the blade transport guard.
OBJ_BUCH-904-002.book Page 27 Thursday, August 5, 2010 2:57 PM English | 27 I When refitting the SDS drive cover 7 ensure all 4 location legs are inside the housing prior to sliding cover into place. J Slide the SDS drive cover 7 back towards the blade 1 to secure. After Use/Storage f Warning! Switch off before adjusting or cleaning. The blades continue to move for a few seconds after the garden product is switched off. Caution! Do not touch the moving blades.
OBJ_BUCH-904-002.book Page 28 Thursday, August 5, 2010 2:57 PM 28 | English KZN – BSC Service Centre Unit E, Almar Centre 143 Crompton Street Pinetown Tel.: +27 (031) 7 01 21 20 Fax: +27 (031) 7 01 24 46 E-Mail: bsc.dur@za.bosch.com Western Cape – BSC Service Centre Democracy Way, Prosperity Park Milnerton Tel.: +27 (021) 5 51 25 77 Fax: +27 (021) 5 51 32 23 E-Mail: bsc@zsd.co.za Bosch Headquarters Midrand, Gauteng Tel.: +27 (011) 6 51 96 00 Fax: +27 (011) 6 51 98 80 E-Mail: rbsa-hq.pts@za.bosch.
