Installation Manual

Stacking in long distance (quadruple stack)
5
125
6 126
125
4
3
2
9
1
128
R
T
T
R
R
TT
R
7
Callout ﹘ Description
1 ﹘ Fourth stack assigned to Channel 3
2 ﹘ Third stack assigned to Channel 2
3 ﹘ Second stack assigned to Channel 1
4 ﹘ First stack assigned to Channel M
5 ﹘ Receiver
6 ﹘ Transmitter
7 ﹘ Group B transmitter/receiver pairs
8 ﹘ Synchro wiring
9 ﹘ Group A transmitter/receiver pairs
Application
Use a quadruple stack configuration when you want to secure a perimeter or an area that has
a high wall, or an environment where you need a higher placement position.
In quadruple stack configurations:
– Each top set stack must be set for Channel M, the next stack set to Channel 1, the next
stack set to Channel 2, and the bottom stack set to Channel 3 to avoid crosstalk.
– Set photobeams sets in the illustration above to Group B (callout 7) to avoid crosstalk
with sets in Group A (callout 9).
Photobeam 5000
Installing multiple sets (stacking) | en 33
Bosch Security Systems, Inc. Installation and Operation Guide 2015.01 | 02 | F.01U.303.478