Installation Manual

Table of contents
1
Introduction 4
1.1 About documentation 4
1.2 Bosch Security Systems, Inc 4
2
System overview 5
2.1 Features 5
2.2 Photobeam overview 6
2.3 Console overview 7
2.4 Transmitter/receiver dimensions 8
3
Installation 9
3.1 Beam spread 9
3.2 Pole mount installation 10
3.3 Wall mount installation 12
4
Wiring 13
4.1 Terminal strip overview 13
4.2 Wiring distance 14
4.3 Wiring routes 14
5
Special features 16
5.1 Selectable beams 16
5.2 Selectable AND/OR Gate 16
5.3 Level LED 16
5.4 EDC (Environmental Discrimination Circuit) 16
5.5 Beam interruption time 17
5.6 Beam power control 17
5.7 High Density 18
6
Setup 21
7
Installing multiple sets (stacking) 25
7.1 Group selection 25
7.2 Channel selection 27
7.3 Synchro wiring 29
7.4 Stacking examples 30
7.4.1 Single stacking 30
7.4.2 Double stack 30
7.4.3 Triple stack 31
7.4.4 Quadruple stack 32
8
Optical alignment 35
8.1 Level LED – alignment of the Upper Beam 35
8.2 Level LED - alignment of the Lower Beam 35
8.3 Volt meter alignment 36
9
Operational check 38
10
Troubleshooting 39
10.1 Additional information 39
11
Certifications 40
12
Specifications 41
Photobeam 5000 Table of Contents | en 3
Bosch Security Systems, Inc. Installation and Operation Guide 2015.01 | 02 | F.01U.303.478