Data Sheet
Selectable AND/OR mode (4-channel models only)
This feature allows an added level of detection by
generating an alarm when four beams from two units
are blocked simultaneously. Environmental conditions
require higher false alarm tolerance against smaller
objects passing through the detector's line of sight. To
do this, set the AND/OR gate option to AND gate mode
that only causes an alarm condition when all four
infrared beams are interrupted simultaneously.
High Security applications might require the detection
of smaller objects passing through the detector's line
of sight. To do this, set the AND/OR gate option to OR
gate mode that causes an alarm condition when either
the upper two beams or the lower two beams are
interrupted.
Dust/insect cover features
The included foam sealing ensures that the detectors
are properly secured from insects and other
environmental elements such as humidity and
temperature fluctuations.
The improved cover design includes water flow
channels to prevent water and dirt from accumulating
in front of optic components, and eliminates the need
for additional weatherproofing solutions.
Environmental Discrimination Circuit
Monitors gradual loss of signal due to dust, fog, rain,
and snow. Normally closed output opens when signal
loss reaches 90%. May be field configured to bypass
alarm relay when activated.
Beam Power Control
The transmitter power output is field adjustable
allowing the user to eliminate reflections and cross-
talk from other units.
This feature improves catch performance and false
alarm immunity, and allows for reliable installation in
most applications.
Test features
High visibility reception level LED improves ease of
installation. Flash rate increases as installation
alignment improves.
Voltage output terminals also allow for improved
alignment accuracy.
Optical module alignment switch to allow for
independent adjustment of upper and lower beam
pairs.
Dual Modulated beam
The Dual Modulated Beam eliminates interference
from external noise sources such as sunlight, car
headlights, electrical interference, etc.
Certifications and approvals
Region Certification
Europe CE EMC, RoHS [ISC-FPB1-W60QF, ISC-
FPB1-W120QF, ISC-FPB1-W200QF
with or wihout BH12T heater]
CE EMC, RoHS [ISC-FPB1-W60QS, ISC-
FPB1-W120QS, ISC-FPB1-W200QS
with or without BH12T heater]
Technical specifications
Photobeam
ISC-FPB1-
W60QS
ISC-FPB1-
W120QS
ISC-FPB1-
W200QS
Maximum
indoor range
120 m
(393 ft)
240 m
(787 ft)
400 m
(1312 ft)
Maximum
outdoor range
60 m
(196 ft)
120 m
(393 ft)
200 m
(656 ft)
* Single channel quad beam series
ISC-FPB1-
W60QF
ISC-FPB1-
W120QF
ISC-FPB1-
W200QF
Maximum
indoor range
120 m
(393 ft)
240 m
(787 ft)
400 m
(1312 ft)
Maximum
outdoor range
60 m
(196 ft)
120 m
(393 ft)
200 m
(656 ft)
* Four channel quad beam series
Environmental considerations
Operating temperature -25°C to +60°C (-13°F to +140°F) (96%
or less)
Storage temperature/
humidity
-30°C to +70°C (-22°F to +158°F)
Relative Humidity 96%
IP rating (indoor) IP66
Mounting considerations
Location Pole mount or surface mount
Horizontal adjustability ±90°
Vertical adjustability ±10°
Distance between upper
and lower lens
245 mm (9.64 in)
Dimensions
Dimensions 103 mm x 398 mm x 99 mm
(4.05 in. x 15.66 in. x 3.89 in.)
2 | Photobeam 5000