Data Sheet

Intrusion Alarm Systems | IPP‑AL400‑ULPS Power Supplies (4.0 A)
IPP‑AL400‑ULPS Power Supplies (4.0 A)
www.boschsecurity.com
u Filtered and electronically regulated outputs
u Short circuit and thermal overload protection
u Built‑in charger
u Automatically switches to standby battery when AC
fails
u Three supervision outputs
The IPP‑AL400‑ULPS is a switching power supply and
charger. It converts 115 VAC, 50 Hz to 60 Hz input into
single 12 VDC or 24 VDC Class 2 Rated power‑limited
output.
Functions
Supervision Monitoring
The IPP‑AL400‑ULPS Power Supply monitors three
independent outputs for the following failure
conditions:
• AC failure
• Low battery
• Battery presence
Certifications and approvals
Either Bosch Security Systems, Inc. or Altronix
®
holds
the following Listings and Approvals:
Region
Certification
USA UL Bosch Security Systems, Inc. -
AMCX.S1871, Central Station Alarm
Units; AOTX.S1871, Local Alarm Units;
APAW.S1871, Police Station-connected
Alarm Units; APOU.S1871, Proprietary
Alarm Units; NBSX.S1871, Household
Burglar Alarm System Units;
UOXX.S5579, Control Unit Accessories,
Region Certification
System; UTOU.S1871, Control Units
and Accessories, Household System
Type
UL Altronix Corporation - ALVY: Access Con-
trol System Units (ANSI/UL294), APHV:
Power Supplies for Use with Burglar-
Alarm Systems (ANSI/UL603), NBRZ:
Hospital Signaling and Nurse Call Equip-
ment (ANSI/UL1069), and UTRZ: Power
Supplies for Fire-Protective Signaling
Systems (UL1481)
CSFM 7300-1615: 226 7300 -- FIRE ALARM
CONTROL UNIT ACCESSORIES/MISC.
DEVICES
Installation/configuration notes
Compatibility Information
The IPP‑AL400‑ULPS is compatible with any device
requiring 12 VDC or 24 VDC. The ULPS enclosure and
the following modules have been listed for use
together:
• IPP‑AL400‑ULPS Power Supply
• IPP‑PD4‑ULCB Power Distribution Module
• C900V2 Dialer Capture Module
• D9210C Access Control Interface Module
• B426 Ethernet Communication Module