Operation Manual
Table Of Contents
- Table of Contents
- 1 Browser connection
- 2 System Overview
- 3 Operation via the browser
- 3.1 Livepage
- 3.2 Playback page
- 4 Settings Overview
- 5 Basic Mode
- 6 Advanced General Settings
- 7 Web Interface
- 8 Camera
- 9 Encoder Settings
- 10 Recording
- 11 Alarm
- 12 Setting up VCA
- 14 Network
- 14.1 Network Access
- 14.1.1 Automatic IP assignment
- 14.1.2 IP V4 address
- 14.1.3 IP V6 address
- 14.1.4 DNS server address 1
- 14.1.5 Video transmission
- 14.1.6 TCP rate control
- 14.1.7 HTTP browser port
- 14.1.8 HTTPS browser port
- 14.1.9 RCP+ port 1756
- 14.1.10 Telnet support
- 14.1.11 Interface mode ETH
- 14.1.12 Network MSS [Byte]
- 14.1.13 iSCSI MSS [Byte]
- 14.1.14 Network MTU [Byte]
- 14.1.15 Enable DynDNS
- 14.1.16 Provider
- 14.1.17 Host name
- 14.1.18 User name
- 14.1.19 Password
- 14.1.20 Force registration now
- 14.1.21 Status
- 14.2 Advanced
- 14.3 Multicast
- 14.4 Image Posting
- 14.5 Accounts
- 14.6 IP V4 filter
- 14.1 Network Access
- 15 Service
Camera Browser Interface Alarm | en 81
Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.05
11.4.7 Attach JPEG from camera
Check the box to specify that JPEG images are sent from the
camera.
11.4.8 Destination address
Enter the e-mail address for alarm e-mails here. The maximum
address length is 49 characters.
11.4.9 Sender address
Enter a unique name for the e-mail sender, for example, the
location of the device. This makes it easier to identify the origin
of the e-mail.
11.4.10 Test e-mail
Click Send Now to test the e-mail function. An alarm e-mail is
immediately created and sent.