Operation Manual
Table Of Contents
- Table of Contents
- 1 Browser connection
- 2 System Overview
- 3 Operation via the browser
- 3.1 Livepage
- 3.2 Playback page
- 4 Settings Overview
- 5 Basic Mode
- 6 Advanced General Settings
- 7 Web Interface
- 8 Camera
- 9 Encoder Settings
- 10 Recording
- 11 Alarm
- 12 Setting up VCA
- 14 Network
- 14.1 Network Access
- 14.1.1 Automatic IP assignment
- 14.1.2 IP V4 address
- 14.1.3 IP V6 address
- 14.1.4 DNS server address 1
- 14.1.5 Video transmission
- 14.1.6 TCP rate control
- 14.1.7 HTTP browser port
- 14.1.8 HTTPS browser port
- 14.1.9 RCP+ port 1756
- 14.1.10 Telnet support
- 14.1.11 Interface mode ETH
- 14.1.12 Network MSS [Byte]
- 14.1.13 iSCSI MSS [Byte]
- 14.1.14 Network MTU [Byte]
- 14.1.15 Enable DynDNS
- 14.1.16 Provider
- 14.1.17 Host name
- 14.1.18 User name
- 14.1.19 Password
- 14.1.20 Force registration now
- 14.1.21 Status
- 14.2 Advanced
- 14.3 Multicast
- 14.4 Image Posting
- 14.5 Accounts
- 14.6 IP V4 filter
- 14.1 Network Access
- 15 Service
Camera Browser Interface Table of Contents | en 7
Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.05
10.4.3 Profile names 73
10.4.4 Activate recording 73
10.4.5 Recording status 73
10.5 Recording Status 74
11 Alarm 75
11.1 Alarm Connections 75
11.1.1 Connect on alarm 75
11.1.2 Number of destination IP address 75
11.1.3 Destination IP address 75
11.1.4 Destination password 75
11.1.5 Video transmission 76
11.1.6 Stream 76
11.1.7 Remote port 76
11.1.8 Video output 76
11.1.9 Decoder 76
11.1.10 SSL encryption 77
11.1.11 Auto-connect 77
11.1.12 Audio 77
11.2 Video Content Analyses (VCA) 78
11.3 Audio Alarm 79
11.3.1 Audio alarm 79
11.3.2 Name 79
11.3.3 Signal Ranges 79
11.3.4 Threshold 79
11.3.5 Sensitivity 79
11.4 Alarm E-Mail 80
11.4.1 Send alarm e-mail 80
11.4.2 Mail server IP address 80
11.4.3 SMTP user name 80
11.4.4 SMTP password 80
11.4.5 Format 80
11.4.6 Image size 80
11.4.7 Attach JPEG from camera 81
11.4.8 Destination address 81
11.4.9 Sender address 81
11.4.10 Test e-mail 81










