Operation Manual
Table Of Contents
- Table of Contents
- 1 Browser connection
- 2 System Overview
- 3 Operation via the browser
- 3.1 Livepage
- 3.2 Playback page
- 4 Settings Overview
- 5 Basic Mode
- 6 Advanced General Settings
- 7 Web Interface
- 8 Camera
- 9 Encoder Settings
- 10 Recording
- 11 Alarm
- 12 Setting up VCA
- 14 Network
- 14.1 Network Access
- 14.1.1 Automatic IP assignment
- 14.1.2 IP V4 address
- 14.1.3 IP V6 address
- 14.1.4 DNS server address 1
- 14.1.5 Video transmission
- 14.1.6 TCP rate control
- 14.1.7 HTTP browser port
- 14.1.8 HTTPS browser port
- 14.1.9 RCP+ port 1756
- 14.1.10 Telnet support
- 14.1.11 Interface mode ETH
- 14.1.12 Network MSS [Byte]
- 14.1.13 iSCSI MSS [Byte]
- 14.1.14 Network MTU [Byte]
- 14.1.15 Enable DynDNS
- 14.1.16 Provider
- 14.1.17 Host name
- 14.1.18 User name
- 14.1.19 Password
- 14.1.20 Force registration now
- 14.1.21 Status
- 14.2 Advanced
- 14.3 Multicast
- 14.4 Image Posting
- 14.5 Accounts
- 14.6 IP V4 filter
- 14.1 Network Access
- 15 Service
62 en | Encoder Settings Camera Browser Interface
AM18-Q0649 | v5.8 | 2013.05 Software manual Bosch Security Systems
9.2.2 JPEG stream
Set the parmeters for the M-JPEG stream.
– Select the Resolution.
– Select the Max. frame rate in images per second (IPS).
– The Picture quality slider allows adjustment of the
M-JPEG image quality from Low to High.
Note:
The M-JPEG frame rate can vary depending on system loading.