Operation Manual
Table Of Contents
- Table of Contents
- 1 Browser connection
- 2 System Overview
- 3 Operation via the browser
- 3.1 Livepage
- 3.2 Playback page
- 4 Settings Overview
- 5 Basic Mode
- 6 Advanced General Settings
- 7 Web Interface
- 8 Camera
- 9 Encoder Settings
- 10 Recording
- 11 Alarm
- 12 Setting up VCA
- 14 Network
- 14.1 Network Access
- 14.1.1 Automatic IP assignment
- 14.1.2 IP V4 address
- 14.1.3 IP V6 address
- 14.1.4 DNS server address 1
- 14.1.5 Video transmission
- 14.1.6 TCP rate control
- 14.1.7 HTTP browser port
- 14.1.8 HTTPS browser port
- 14.1.9 RCP+ port 1756
- 14.1.10 Telnet support
- 14.1.11 Interface mode ETH
- 14.1.12 Network MSS [Byte]
- 14.1.13 iSCSI MSS [Byte]
- 14.1.14 Network MTU [Byte]
- 14.1.15 Enable DynDNS
- 14.1.16 Provider
- 14.1.17 Host name
- 14.1.18 User name
- 14.1.19 Password
- 14.1.20 Force registration now
- 14.1.21 Status
- 14.2 Advanced
- 14.3 Multicast
- 14.4 Image Posting
- 14.5 Accounts
- 14.6 IP V4 filter
- 14.1 Network Access
- 15 Service
Camera Browser Interface Camera | en 45
Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.05
8.3 Picture Settings — ALC
ALC mode
Select the mode:
– Fluorescent 50 Hz
– Fluorescent 60 Hz
–Outdoor
ALC level
Adjust the video output level (-15 to 0 to +15).
Select the range within which the ALC will operate. A positive
value is more useful for low-light conditions; a negative value is
more useful for very bright conditions.
8.3.1 Exposure/frame rate
Auto exposure/frame rate
Select to let the camera automatically set the optimum shutter
speed. The camera tries to maintain the selected default
shutter speed as long as the light level of the scene permits.
– Select a minimum frame rate. (The values available depend
on the value set for the Base Frame Rate in the Installer
Menu.)
Fixed exposure
Select to set a fixed shutter speed.
– Select the shutter time for fixed exposure. (The values
available depend on the value set for the ALC mode.)