Installation guide

EN | 3
Bosch Security Systems | 2005-09 | V3.0
Installation and Operating Manual | VIDOS IntuiKey
Introduction 1
About this manual
This manual is intended for persons responsible for setting up and using the
BOSCH IntuiKey digital control panel for use with VIDOS. In the following it
therefore is referred to as VIDOS IntuiKey in order to point out that all information
is limited to the work carried out in association with VIDOS. This manual
describes the setup and operation of the VIDOS IntuiKey control panel.
In addition, you should refer to the general documentation supplied with the
control panel and the safety instructions it contains.
Conventions in this manual
The following symbols and notations highlight important situations and
information:
Warning!
Safety instructions where non-compliance can result in damage to the unit
are marked with this symbol.
Note
This symbol indicates special features and provides tips and information
for easier, more convenient use of the software.
Terms that you can find in the program, e.g. menu options or commands, are
written in bold.
References to other documents or other points in this document are written in
SMALL CAPITALS.
If you have any questions about the programs from the VIDOS Pro Suite, you
can find further information on the Internet at:
www.vidos.net
There, you will also find information about new releases or manual versions. You
can also submit your suggestions and comments relating to this document so
that these can be taken into account for future editions.