Installation guide

EN | 27
Bosch Security Systems | 2005-09 | V3.0 Monitoring with VIDOS IntuiKey
Installation and Operating Manual | VIDOS IntuiKey
Additional actions
Disconnect
If you no longer want data to be displayed on a monitor, proceed as follows:
1. Press Mon.
2. Enter the number of the monitor.
If you make a typing error, press Clr and enter the number again.
3. Press ↵ (Enter) to confirm the entry.
The control panel now expects you to enter the number for the camera.
4. Enter 0 [zero] as the number of the camera you want to connect.
5. Press
↵ (Enter) to confirm the entry.
No more video data is displayed on the monitor.